LSA 6 rib accessory drive system for LS truck belt spacing.
Our LSA Belt drive system uses your existing LS truck Accessories. No need to buy an 8 rib system to use your LSA supercharger.
This system has more belt wrap than any other system available on the market.
We use 1/2 thick billet aluminum to construct this system. Which provides the strongest assembly available. No need to worry about flexing, or throwing belts.
This system is only recommended for vehicles using the stock supercharger pulley. If you plan to use a smaller pulley, or rev over 6200 RPM you will need our BD15 kit with heavy duty belt tensioner. We sell the tensioner and bracket system separately if you wish to upgrade later.
No throttle body spacer needed to clear factory 4 bolt DBW throttle bodies.
Parts not included that are required to run this kit.
Belt tensioner, serpentine belt, factory truck accessories, and crank pulley. Due to the various combinations of pulleys, intake spacers etc... We recommend installing the kit and measuring the belt specific for your application. We offer manual belt tensioners if you do not want to run a factory spring loaded tensioner.
If using a gen3 water pump you will need to trim, or bend your water outlet slightly to clear the bypass valve. Gen4 water pumps clear as is.
You will need to pin your crank if installing an LSA supercharger as well. Check out our tools section for LS crank pin kits.